Methodology for modeling processes in multi-component two-phase LNG systems

Tyumen State University Herald. Physical and Mathematical Modeling. Oil, Gas, Energy


Release:

2024. Vol. 10. № 2 (38)

Title: 
Methodology for modeling processes in multi-component two-phase LNG systems


For citation: Saftly, A., & Zaitsev, A. V. (2024). Methodology for modeling processes in multi-component two-phase LNG systems. Tyumen State University Herald. Physical and Mathematical Modeling. Oil, Gas, Energy, 10(2), 25–44. https://doi.org/10.21684/2411-7978-2024-10-2-25-44

About the authors:

Saftly Adham, Postgraduate Student, Educational Center “Energy-Efficient Engineering Systems”, ITMO University, Saint Petersburg, Russia; adhamsaftly1994@gmail.com, https://orcid.org/0009-0009-4501-7010

Andrey V. Zaitsev, Cand. Sci. (Tech.), Associate Professor, Educational Center “Energy-Efficient Engineering Systems”, ITMO University, Saint Petersburg, Russia; zai_@inbox.ru, https://orcid.org/0000-0003-0677-6320

Abstract:

Liquefied natural gas (LNG) is the most economical means of transporting natural gas over long distances. In maximum volumes, LNG is transported by ships to designated unloading points at storage terminals. During unloading and storage of LNG, a certain part of it passes into the gaseous phase. The main factors influencing the evaporation process are the transfer of heat from the surrounding air. Evaporation of a part of the multicomponent liquid, in turn, leads to a change in the composition of the stored LNG and, as a result, affects its thermodynamic properties and cost indicators. Intensification of evaporation processes can potentially jeopardize the stability and safety of LNG storage procedures and other technological processes. At the same time, depending on the mole concentration of individual components, the basic thermodynamic parameters of LNG can change significantly.
One of the most important issues when analyzing the technological process of storing liquefied natural gas as a multicomponent liquid is the implementation of a convenient calculation system based on known relationships and methodologies with performing thermodynamic calculations of the properties of mixtures, determining phase equilibrium, taking into account the thermal balance of the system with the environment, etc. This approach makes it possible to increase the ability to predict changes in individual parameters, to ensure the thermodynamic stability of the system taking into account external influences. It becomes possible to comprehensively study complex internal dynamic processes of changes in temperature, pressure, mole fraction of vapor, component composition of phases in a tank, which is usually carried out without taking into account external technological processes of equipment operation. The article presents the results of the development and application of a methodology for the process of drainage-free storage of a binary mixture consisting of pure methane and a relatively small amount of nitrogen (up to 10%). As a result, the influence of nitrogen on the dynamics of changes in the parameters of a two-phase system — boil-off gases and liquefied product (methane) has been demonstrated.

References:

Brusilovsky, A. I. (2002). Phase transformations in the development of oil and gas fields. Graal. [In Russian]

Domashenko, A. M., & Agafonov, I. M. (1984). Experimental investigation of heat and mass transfer in storage without drainage of cryogenic products to supercritical pressure. Chemical and Petroleum Engineering, 20, 451–453. https://doi.org/10.1007/BF01166114

Fyodorova, E. B. (2019). Comprehensive scientific and technological justification for the production of liquefied natural gas [Doctoral dissertation, Gubkin University]. [In Russian]

Adom, E., Islam, S. Z., & Ji, X. (2010). Modelling of boil-off gas in LNG tanks: A case study. International Journal of Engineering and Technology, 2(4), 292–296.

Baker, C. J. (2018). Phase equilibrium measurements and advanced modelling for optimising liquefied natural gas production [Doctoral thesis, The University of Western Australia]. https://doi.org/10.26182/5bc411e7ccc0d

Hasan, M. M. F., Zheng, A. M., & Karimi, I. A. (2009). Minimizing boil-off losses in liquefied natural gas transportation. Industrial & Engineering Chemistry Research, 48(21), 9571–9580. https://doi.org/10.1021/ie801975q

Khan, M. S., Qyyum, M. A., Ali, W., Wazwaz, A., Ansari, K. B., & Lee, M. (2020). Energy saving through efficient bog prediction and impact of static boil-off-rate in full containment-type LNG storage tank. Energies, 13(21), Article 5578. https://doi.org/10.3390/en13215578

Migliore, C., Tubilleja, C., & Vesovic, V. (2015). Weathering prediction model for stored liquefied natural gas (LNG). Journal of Natural Gas Science and Engineering, 26, 570–580. https://doi.org/10.1016/j.jngse.2015.06.056

Mokhatab, S., & Poe, W. A. (2012). Handbook of natural gas transmission and processing (2nd ed.). Gulf Professional Publishing.

Mokhatab, S., Mak, J. Y., Valappil, J. V., & Wood, D. (2013). Handbook of liquefied natural gas. Gulf Professional Publishing. 624 pp.

Nasri, Z., & Binous, H. (2009). Applications of the Peng-Robinson equation of state using MATLAB. Chemical Engineering Education, 43(2), 115–124.

Peng, D.-Y., & Robinson, D. B. (1976). A new two-constant equation of state. Industrial & Engineering Chemistry Fundamentals, 15(1), 59–64. https://doi.org/10.1021/i160057a011

Rahmania, A., & Purwanto, W. W. (2020). Simulation of boil-off gas effect along LNG supply chain on quantity and quality of natural gas. AIP Conference Proceedings, 2223(1), Article 040004. https://doi.org/10.1063/5.0000853

GIIGNL. (n.d.). Rollover in LNG storage tanks. 2nd Edition: 2012–2015. Public version. https://giignl.org/document/rollover-in-lng-storage-tanks/

Wilson, G. (1968). A modified Redlich-Kwong EOS, application to general physical data calculations. American Institute of Chemical Engineers 65th National Meeting, Article 15C.

Włodek, T. (2015). Phase equilibria for liquefied natural gas (LNG) as a multicomponent mixture. AGH Drilling, Oil, Gas, 32(3), 539–550.

Włodek, T. (2016). Analysis of liquefied natural gas thermodynamic properties involving phase equilibria calculations. 16th International Multidisciplinary Scientific GeoConference (SGEM 2016), 3, 729–736.

Włodek, T. (2019). Analysis of boil-off rate problem in Liquefied Natural Gas (LNG) receiving terminals. IOP Conference Series: Earth and Environmental Science, 214, Article 012105. https://doi.org/10.1088/1755-1315/214/1/012105

Wordu, A. A., & Peterside, B. (2013). Estimation of boil-off-gas BOG from refrigerated vessels in liquefied natural gas plant. International Journal of Engineering and Technology, 3(1), 44–49.

Zakaria, M. S., Osman, K., Yusof, A. A., Hanafi, M. H. M., Saadun, M. N. A., & Manaf, M. Z. A. (2014). Parametric analysis on boil-off gas rate inside liquefied natural gas storage tank. Journal of Mechanical Engineering and Sciences, 6, 845–853. https://doi.org/10.15282/jmes.6.2014.10.0080