Release:
2021. Vol. 7. № 3 (27)About the authors:
Elena O. Antonova, Cand. Sci. (Tech.), Associate Professor, Department of Industrial Heat Power Engineering, Industrial University of Tyumen; antonovaeo@tyuiu.ruAbstract:
This article presents a brief history of the country’s heat supply system development. The types of heat supply systems are considered, their brief characteristics are given. Methods for determining the heat load for household needs (heating and hot water supply) of urban residents are presented.
The study of the coolant temperature influence on the air temperature in the room was carried out. The study used an experimental-theoretical research method. As a part of the experimental study, the data of temperature measurements in one of the heating points in Tyumen were requested. Within the framework of a theoretical study, the air temperature in a living room was calculated, depending on the coolant temperature according to the schedule of the CHPP and according to the supply in the supply heat pipe. In carrying out the theoretical study, standard methods were used for carrying out thermal calculations of heat supply systems, statistical research methods, as well as standard computer programs.
The need to regulate heat energy is determined and the types of regulation are considered. The analysis of the adopted temperature schedule of the CHPP was carried out and a comparison was made with the calculated temperature schedule. The solution of the equation for determining the air temperature in the room is given. The air temperature in the room depends simultaneously on two factors: the temperature of the heating medium and the temperature of the outside air. As a result of the study, the presence of a discrepancy between the temperatures of the network water supplied to consumers and the created air temperature in residential premises was determined. The intersection point of the calculated temperature schedule and the CHP schedule was determined. The necessity of observing the calculated temperature schedule of the central quality regulation has been substantiated. The necessity of heat supply at a constant flow rate of the heat carrier has also been substantiated.
Keywords:
References:
Administration of Tyumen city: official portal. Updated heat supply scheme of the Tyumen City District municipality for the period 2018-2033. Accessed 21 April 2021. https://www.tyumen-city.ru/vlast/administration/struktura-administracii-goroda-tumeni/departaments/d... [In Russian]
The set of rules: SP 124.13330.2012. 2020. Heating networks: approved by the Ministry of Construction, Housing and Utilities of the Russian Federation on 30 December 2006: put into effect on 1 January 2013. Moscow: Ministry of Regional Development of Russia. 19 pp. [In Russian]
The set of rules: SP 131.13330.2018. 2000. Construction climatology: approved by the Ministry of Construction and Housing and Utilities of the Russian Federation 29 May 2018: put into effect 29 May 2019. Moscow: GUP TsPP. 57 pp. [In Russian]
The set of rules: SP 60.13330.2016. 2020. Heating, ventilation and air conditioning. Updated edition: SNiP 41-01-2003: approved by the Ministry of Construction, Housing and Utilities of the Russian Federation on 16 December 2016: put into effect on 17 June 2017. Moscow: Ministry of Construction of Russia. 108 pp. [In Russian]
Stepanov O. A. , Antonova E. O. , Rydalina N. V. 2019. Sources and systems of heat supply in examples and tasks: a tutorial. Tyumen: TIU. 80 pp. [In Russian]
Construction norms and rules: SNiP 2.04.07-86. 2003. Heating networks: approved by the decree of the State Construction Committee of the USSR on 30 December 1986: with amendments, put into effect on 12 October 2001. Moscow: Gosstroy of Russia. 57 pp. [In Russian]
Tikhomirov A. K. 2006. Heat supply of the city district: a tutorial. Khabarovsk: Pacific University Publishing House. 135 pp. [In Russian]
Khrustalev B. M. , Kuvshinov Yu. Ya., Kopko V. M. (eds.). 2012. Heat supply and ventilation. Course design. Moscow: ASV. 784 pp. [In Russian]
Davletbaev V., Rydalina N., Antonova E. 2018. “Experimental investigation of the heat exchange intensity”. International Scientific Conference on Energy, Environmental and Construction Engineering, EECE-2018, 19-20 November, St. Petersburg. MATEC Web of Conferences, vol. 245, art. 07002. DOI: 10.1051/matecconf/201824507002
Stepanov О., Aksenov B., Rydalina N., Antonova E. 2019. “Heat-exchange units with porous inserts”. International Scientific Conference on Energy, Environmental and Construction Engineering, EECE-2019, 19-20 November, St. Petersburg. E3S Web of Conferences, vol. 140, art. 05006. DOI: 10.1051/e3sconf/201914005006
